If you know what you need to achieve but don't know how to accomplish it, we are here to help. CONTACT US AT : INFO@SYNERGAGPRO.COM OR 707-535-0599
Regenerative blowers are the ideal solution for moving large volumes of air at lower pressures or vacuums.
AIR PUMPS
-
Regenerative blowers are oil-less and have no complicated intake/exhaust valve.
-
Most blower makes can be mounted in any plane and with dynamically balanced impellers generate little vibration.
-
As a "non-positive displacement" compressor /vacuum pump, discharged air, besides being clean, is pulsation-free. This is an important consideration particularly for plants or instrumentation use. Regenerative blowers are used in a broad range of applications. These Pumps include: pneumatic conveying, sewage aeration, spas, dryers, dust/smoke removal, industrial vacuum systems, soil vapor extraction, and chip removal for engraving equipment.
Click on the picture to enlarge
Anywhere high airflow and low vacuum/pressure is required, regenerative blowers are an ideal solution as a properly installed blowers will provide years of service free operation.
About Air Pumps
-
Unlike positive displacement compressors and vacuum pumps, regenerative blowers "regenerate" air molecules through a non-positive displacement method to create vacuum or pressure.
-
For the engineer, one of the biggest benefits of a regenerative blower is, by virtue of its fundamental design, its lack of maintenance/monitoring requirements.
-
The impeller is the only moving part; it does not come in contact with the housing channels and is, therefor, "wear-free".
-
Self-lubricated bearings are the only wearing parts.
-
40 - 450 LPM Commercial Electromagnetic
-
350 - 2750 LPM Regenerative Rotary
DIAPHRAGM PUMPS
The Perfect Solution to Pump Microorganisms and fungi
HV SERIES
HV-50
HV-40
45 PSI HIGH VOLUME
7.5 TO 13.5 GMP MICROBIOLOGY DIAPHRAGM PUMPS
HV-26 - 6.87 GPM 12 VDC
HV-40 -10.56 GPM 12 VDC
HV-50 -13.5 GPM 120 VAC
About Fluid Pumps
-
An hydraulic pump is a mechanical device that converts mechanical power into hydraulic energy.
-
The pump produces liquid movement or flow: it does not generate pressure. It produces the flow necessary for the development of pressure which is a function of resistance to fluid flow in the system.
PD-4 110 VAC 60 Watts 40 PSI @ 4.5 GHP
11" Lenght x 5" Height x 4" Width
PD-5 12 VDC 6 AMPS 40 PSI @ 4.5 GPM
11" Lenght x 5" Height x 4" Width
